Power Commander 3.

Best tyres, Suspension setup, Accessories...
Post Reply
User avatar
Coddy
Chavtastic!
Posts: 920
Joined: Sat May 21, 2005 2:54 am
Current Ride: 2011 Ecosse Arr Waan SP Special.
Location: I did see the speed limit officer, i just didn't see you....

Power Commander 3.

Post by Coddy »

Can anyone with a PC3 fitted tell me, when you turn on the ignition, does some of the green lights on the PC3 light up.

Canna get my track bile to start, but noticed that there are none of the green lights on the left side lighten up, when i turn on the ignition.
Checked my mates FirePlace, and when the ignition is turned on, the lights do there merry dance, then settle at the bottom.
MadG
Direct Access
Posts: 31
Joined: Fri Jan 06, 2006 5:57 pm
Location: Aberdeen

Re: Power Commander 3.

Post by MadG »

When you move the throttle with the ignition on, not running, thg green lights should increase with throttle position.

Hope this helps and if you want me to check anything else let me know.
User avatar
Grant
Panty Granty
Posts: 521
Joined: Mon Jul 11, 2005 1:29 pm

Re: Power Commander 3.

Post by Grant »

Sounds like you're not getting a signal to the pissy.

Start by confirming the battery connections to the pissy and also the loom connections.
User avatar
Coddy
Chavtastic!
Posts: 920
Joined: Sat May 21, 2005 2:54 am
Current Ride: 2011 Ecosse Arr Waan SP Special.
Location: I did see the speed limit officer, i just didn't see you....

Re: Power Commander 3.

Post by Coddy »

All connections and fuses seem ok.

Get the feelling bike is not getting fuel. No lights on PC3, so when throttle moved, see nothing on module.

The bike is getting spark, and the plugs are not wet when the plugs are removed. (Am i right is saying the PC3 does not control spark - without ignition module fitted. PC3 only working the fuel). Plugs pretty black when removed (lean).

Fuel pump priming and working.

Think the PC3 is not telling the injectors to operate.

Fukking Eyetie bikes. :angryfire
User avatar
airwave
Tank Slapper
Posts: 690
Joined: Fri Mar 25, 2005 10:06 pm
Current Ride: Yam MT10, 'Rox Scoota (currently on trailer of shame, still leaking oil . . from somewhere internal . .
Location: Stoney (sometimes)

Re: Power Commander 3.

Post by airwave »

Fix It Again Tam,


hahaha
:log

nice bike though :2up
MadG
Direct Access
Posts: 31
Joined: Fri Jan 06, 2006 5:57 pm
Location: Aberdeen

Re: Power Commander 3.

Post by MadG »

Thought about it some more and the lights moving with the throttle position would only confirm the throttle position sensor is working. If there are no lights on the pissy then it would suggest its not getting powered up.
User avatar
Grant
Panty Granty
Posts: 521
Joined: Mon Jul 11, 2005 1:29 pm

Re: Power Commander 3.

Post by Grant »

Does the bike work with the PC3 disconnected?
User avatar
jbrebel
2lb Black Ribbed Knobler
Posts: 404
Joined: Mon Jun 05, 2006 3:59 pm
Current Ride: The light fantastic
Location: Winter Wonderland

Re: Power Commander 3.

Post by jbrebel »

Maybe time to try a different path to get it working?
Image
;)
User avatar
Coddy
Chavtastic!
Posts: 920
Joined: Sat May 21, 2005 2:54 am
Current Ride: 2011 Ecosse Arr Waan SP Special.
Location: I did see the speed limit officer, i just didn't see you....

Re: Power Commander 3.

Post by Coddy »

jbrebel wrote:Maybe time to try a different path to get it working?
Image
;)
As long as Jimmer doesn't expect me to sit on his knee, on his funcy seat watching movies of fat Scouts on roller coasters, he is welcome to hae a go to get this fcuking thing running. ;)
User avatar
al
Mass Debater
Posts: 4768
Joined: Wed Sep 05, 2001 1:00 am
Current Ride: Space Hopper
Location: Uranus
Contact:

Re: Power Commander 3.

Post by al »

Have you tried switching it off then back on again?
User avatar
Coddy
Chavtastic!
Posts: 920
Joined: Sat May 21, 2005 2:54 am
Current Ride: 2011 Ecosse Arr Waan SP Special.
Location: I did see the speed limit officer, i just didn't see you....

Re: Power Commander 3.

Post by Coddy »

Suprisingly Big Kneed Al (master of the emergency stop & "stand up" comedian), i never thought of your advise.

Contemplating the next stage. Skelping fcuk out of it with a sledge hammer.
User avatar
al
Mass Debater
Posts: 4768
Joined: Wed Sep 05, 2001 1:00 am
Current Ride: Space Hopper
Location: Uranus
Contact:

Re: Power Commander 3.

Post by al »

Do you still have the box it came in and the receipt?
User avatar
Dave
Enjoys a nice shaft!
Posts: 2160
Joined: Fri Dec 12, 2003 8:24 am
Current Ride: Big sensible pretty bikes with big smooth tyres,
Small bikes with small lumpy tyres and a truck with HUGE lumpy tyres !
Location: Red Dwarf
Contact:

Re: Power Commander 3.

Post by Dave »

Coddy wrote: Skelping fcuk out of it with a sledge hammer.

That is one of the “off” switches :2up

But then finding the “on” switch is a real bugger
User avatar
airwave
Tank Slapper
Posts: 690
Joined: Fri Mar 25, 2005 10:06 pm
Current Ride: Yam MT10, 'Rox Scoota (currently on trailer of shame, still leaking oil . . from somewhere internal . .
Location: Stoney (sometimes)

Re: Power Commander 3.

Post by airwave »

Coddy wrote:Suprisingly Big Kneed Al (master of the emergency stop & "stand up" comedian), i never thought of your advise.

Contemplating the next stage. Skelping fcuk out of it with a sledge hammer.
at the core . . .
still a slackline hand. . . :worthy
User avatar
Coddy
Chavtastic!
Posts: 920
Joined: Sat May 21, 2005 2:54 am
Current Ride: 2011 Ecosse Arr Waan SP Special.
Location: I did see the speed limit officer, i just didn't see you....

Re: Power Commander 3.

Post by Coddy »

Hurray, she lives.

Power Commander fooked.

Time for a wee run on the private test track (back roads :roll ) to see if its going ok.

Just the 1098 to get back hopefully Wednesday, then get first shottie of a bike this year.
Post Reply