Hey guys just wondering what products I need.
Took the NC29 for a spin at the weekend for a test run(in a private compound ) , looks like I will have to MOT to sell it, just one problem left and woohoo.
Ran fine, nippy machine, anyway on the journey back something started knocking, checked over the bike looks like some new exhaust exhaust studs were working there way out of the block.
I did properly torque them, and dont want to over tighen them, as I have already went through the pain of snapped stud.
anyone a decent thread \ stud locking compound for use with the high heat?
Cheers
Thread Locking Products
-
- Baw Bag
- Posts: 108
- Joined: Wed Jun 25, 2008 8:18 pm
- Current Ride: GSXR 1000 K3
- Location: Either Glued to the XLax or My Bike
- Neorion
- Supergeek
- Posts: 207
- Joined: Mon Sep 29, 2008 4:30 pm
- Current Ride: VFR 800 FI
Best advice I was given
"ride for yourself and don't watch my back wheel"
guess who? - Location: Far from home
Re: Thread Locking Products
Would it be worth some new bolts or a re-tap? I would be pissed if I bought a bike and then couldnt work on it and shear a bolt off
-
- Baw Bag
- Posts: 108
- Joined: Wed Jun 25, 2008 8:18 pm
- Current Ride: GSXR 1000 K3
- Location: Either Glued to the XLax or My Bike
Re: Thread Locking Products
? hmm maybe i didnt make my self clear.
the ones that were sheared off, have been removed and retapped. fitted 8 new studs and bolts. but some are working there way loose, just looking for some type of thread lock for high temps
the ones that were sheared off, have been removed and retapped. fitted 8 new studs and bolts. but some are working there way loose, just looking for some type of thread lock for high temps