AberdeenBikers

Posted: **Wed Jun 25, 2008 9:30 am**

Plan on getting Adolf back to looking new again, as much as i love the rough look on him he deserves better.

Will be fitting his new nose and side this weekend but plan on putting the crash bungs on this time. right hand side will need a hole welded so i'm going to need someones help. Preferably someone that knows what they are doing!!

Also trying to source him a rear end..been on Gixerjunkies and Ebay but to no avail so if anyone fancies nicking one i know where there's a lookalike parked

Will also get his heated grips on again uncase i get the urge to ride him to the bouley at 3am again haha. Brrrrr

Posted: **Wed Jun 25, 2008 12:56 pm**

Lynners wrote:right hand side will need a hole welded so i'm going to need someones help.

Do you mean drilled???

Lynners wrote:Will also get his heated grips on again uncase i get the urge to ride him to the bouley at 3am again haha. Brrrrr

You know it makes sense!!

Lynners wrote:Also trying to source him a rear end

Is your not big enough??

Posted: **Wed Jun 25, 2008 12:58 pm**

yes i meant drilled

You see why i'm not going to give it a go!!!

and yes i know my arse is fat so i'm off to the gym tonight. Too much booze and fine food on the West Coast

Posted: **Wed Jun 25, 2008 1:03 pm**

Lynners wrote:yes i meant drilled You see why i'm not going to give it a go!!!

and yes i know my arse is fat so i'm off to the gym tonight. Too much booze and fine food on the West Coast

It shouldn't take long to do that. Let me know when you are planning on doing it and I can come round and ream your hole!

Posted: **Wed Jun 25, 2008 1:05 pm**

Big Kneed Al (master of the emergency stop & "stand up" comedian) wrote:
Lynners wrote:yes i meant drilled You see why i'm not going to give it a go!!!

and yes i know my arse is fat so i'm off to the gym tonight. Too much booze and fine food on the West Coast
It shouldn't take long to do that. Let me know when you are planning on doing it and I can come round and ream your hole!

There's an offer i can't refuse

Hopefully be Saturday am. i have no power in my lock up tho, i presume i need some?

Posted: **Wed Jun 25, 2008 2:01 pm**

Lynners wrote:Hopefully be Saturday am. i have no power in my lock up tho, i presume i need some?

I'll bring my battery powered drill. I'm sure you have lots of experience with battery operated tools.

Big Kneed Al (master of the emergency stop & "stand up" comedian).

Posted: **Wed Jun 25, 2008 2:04 pm**

Big Kneed Al (master of the emergency stop & "stand up" comedian) wrote:
Lynners wrote:Hopefully be Saturday am. i have no power in my lock up tho, i presume i need some?
I'll bring my battery powered drill. I'm sure you have lots of experience with battery operated tools.

Big Kneed Al (master of the emergency stop & "stand up" comedian) ( Super Nanny ).

Yippee!! I'll PM you my number. We can practice on RK6's panels first

Posted: **Wed Jun 25, 2008 2:06 pm**

Once you've practised on Lynners and Rowans fancy doing my one too

Posted: **Wed Jun 25, 2008 3:57 pm**

Lynners wrote:We can practice on RK6's panels first

I have a set of old panels for the Storm, they'd be perfect for a practice run. . .

NB: You will be squished if I see any holes on my bike

Posted: **Wed Jun 25, 2008 4:24 pm**

gixxerbabe wrote:Once you've practised on Lynners and Rowans fancy doing my one too

I'm not sure about going anywhere near Rowans hole but if you want me to drill both of your holes then I sure I can accommodate you!

Posted: **Wed Jun 25, 2008 4:30 pm**

Big Kneed Al (master of the emergency stop & "stand up" comedian) wrote:
gixxerbabe wrote:Once you've practised on Lynners and Rowans fancy doing my one too
I'm not sure about going anywhere near Rowans hole but if you want me to drill both of your holes then I sure I can accommodate you!

What a gentleman you are

Posted: **Thu Jun 26, 2008 3:31 am**

Lynners wrote:
Big Kneed Al (master of the emergency stop & "stand up" comedian) ( Super Nanny ) wrote:
gixxerbabe wrote:Once you've practised on Lynners and Rowans fancy doing my one too
I'm not sure about going anywhere near Rowans hole but if you want me to drill both of your holes then I sure I can accommodate you!
What a gentleman you are

The 'Benny Hill' school of double entendre

Posted: **Thu Jun 26, 2008 9:30 am**

With so many holes to drill your going to need some lube (I can't believe it's not butter!) for that drill bit m8, Nothing Worse than a blunt drill bit

Posted: **Thu Jun 26, 2008 9:32 am**

Snoop wrote:With so many holes to drill your going to need some lube (I can't believe it's not butter!) for that drill bit m8, Nothing Worse than a dry hole

average mental age on this website . . . . (the males) . . . 14

I'm so at home

Posted: **Sun Jun 29, 2008 10:41 pm**

Thanks Big Kneed Al (master of the emergency stop & "stand up" comedian) Turned up with a huge beast of a thing. Got straight on to the job in hand, drilled away and was done rather quickly than i anticipated tho. Even had to go home and return with more tools, i got changed into my leathers for his return

Gixxerbabe, your in for a treat he's the man for the job

Like the dentist after he drills me i even got a sticker

Posted: **Mon Jun 30, 2008 1:23 am**

Lynners wrote:
Like the dentist after he drills me i even got stickier

AberdeenBikers

HELP with Crashbungs

HELP with Crashbungs

Re: HELP with Crashbungs

Re: HELP with Crashbungs

Re: HELP with Crashbungs

Re: HELP with Crashbungs

Re: HELP with Crashbungs

Re: HELP with Crashbungs

Re: HELP with Crashbungs

Re: HELP with Crashbungs

Re: HELP with Crashbungs

Re: HELP with Crashbungs

Re: HELP with Crashbungs

Re: HELP with Crashbungs

Re: HELP with Crashbungs

Re: HELP with Crashbungs

Re: HELP with Crashbungs