Plastic Welding!

[Coully]

Anyone do this?
need some done on side panel of my vfr

[Zax]

The lad up in cove that also does painting used to do the plastic welding

[Gazza]

The lad up in cove that also does painting used to do the plastic welding

Mike Stewart 01224 871230.

[kennybhoy]

The lad up in cove that also does painting used to do the plastic welding

Mike Stewart 01224 871230.

does he paint also?

[Gazza]

The lad up in cove that also does painting used to do the plastic welding

Mike Stewart 01224 871230.

does he paint also?

Yes. He did a sterling job on my Ducati a few years back after I slid it down the road at Knockhill.

[Coully]

cheers folks

[kennybhoy]

[/quote]

does he paint also?[/quote]

Yes. He did a sterling job on my Ducati a few years back after I slid it down the road at Knockhill.[/quote]

cheers . got an annoying little crack on my left-hand side panel on the Zephyr. Think it was caused by the strops being too tight in the transporting van....

[Coully]

is it a home number? or a work one, just to know as to when is an appropriate time to call

[DinGuS]

good info will give mike a ring myself... had a wee accident involving the t595 and a paddock stand

[Coully]

oops

[DinGuS]

triumph designed the stand so it must be their fault

[al]

I have used the Plastex Plastic Repair system with great success in the past ( http://www.plastexexpress.co.uk/ ).

Takes a bit of patience to use but the results are great. I've even used it to create new fairing tabs. It has all sorts of uses.

tt600_fairing_tab.jpg

Big Kneed Al (master of the emergency stop & "stand up" comedian).

[plazze]

do it urselff heat up a screw driver and use tie wraps for plastic its easy