AberdeenBikers

looking for advice on the best way of accessing the spark plugs on my Gixxer....Have not had the bike long and i am struggling to find the correct way of changing the plugs without killing the bike or ME!!

Just keep digging till you get to them

Seriously though, if you have not done it before remember to mark the plug leads so you know which order they go back in and stuff rags or paper towels down the carbs so you don’t drop anything down there

And don’t do what Gixxerbabe done and snap them off down there
About 13 ft-lb is all it needs

Shrek wrote:
And don’t do what Gixxerbabe done and snap them off down there

Cheers guys.......not used to stripping half a fekkin bike just to change the plugs