A few questions.........
- Toonser
- Scary biscuits
- Posts: 162
- Joined: Tue Apr 10, 2007 8:08 pm
- Current Ride: YER MA!!
A few questions.........
.
Last edited by Toonser on Wed Apr 16, 2008 7:47 pm, edited 1 time in total.
- RK6
- Would you like a mushroom?
- Posts: 1508
- Joined: Thu Feb 01, 2007 2:30 pm
- Current Ride: Hypermotard SP
- Location: Aberdeen
- yimmit
- Just Passed
- Posts: 46
- Joined: Mon Sep 25, 2006 11:42 pm
- Location: stoney
http://www.motuk.co.uk/manual/mc_contents.htm
heres a link to the mot testers manual which may help for the mot but dosen't necessary mean that it legal
heres a link to the mot testers manual which may help for the mot but dosen't necessary mean that it legal
- phatkat
- Baw Bag
- Posts: 102
- Joined: Sun Aug 19, 2007 8:08 pm
- Location: Eberdeen
- Contact:
-
- Chopper
- Posts: 234
- Joined: Mon Dec 18, 2006 2:55 am
- Current Ride: GSXR 600 SRAD
- Location: Aberdeen
for a mods on your rear wheel try checking this forum..
http://www.customfighters.com/
i have signed up to this forum b4 and by going on some of the projects ppl have been doing, your prob fin your answer there..
i think with you wanting to put on a wider wheel. you to main factors i can see would be the width of the tyre and it rubbing on the swingarm. and you might find that you will need to get some custom made spacers to fit between the wheel and swingarm..
i would start by seeing if a gixxer wheel will fit in. if not then it will prob be a custom backend with the swingarm from a gixxer
sounds an interesting project your doing and if i find any info out about it i will give you a shout as i'm interest in custom streetfighter bikes and always wanted to do one myself..

http://www.customfighters.com/
i have signed up to this forum b4 and by going on some of the projects ppl have been doing, your prob fin your answer there..
i think with you wanting to put on a wider wheel. you to main factors i can see would be the width of the tyre and it rubbing on the swingarm. and you might find that you will need to get some custom made spacers to fit between the wheel and swingarm..
i would start by seeing if a gixxer wheel will fit in. if not then it will prob be a custom backend with the swingarm from a gixxer
sounds an interesting project your doing and if i find any info out about it i will give you a shout as i'm interest in custom streetfighter bikes and always wanted to do one myself..

-
- Direct Access
- Posts: 15
- Joined: Sun Oct 21, 2007 12:24 am