Does anyone know of where i can source m6 bolts or screws for bolting together the crankcases of a Yamaha ycs1c (180 twin 2 stroke pre rd200 from 1967)
know i could prob head to a breaking point and have a look for bolts/screws that would do the job .But since its a restoration project would prefer to get new most places i have checked online only carry up to about 90mm length but need about 150 to 200mm ish long .Since its for bolting the inner crankcases together think using threaded rod is a bad idea .
am sudgestions of possible suppliers gratefully recieved thanks in advance
Crankcase m6 bolts/screws
-
memini
- Direct Access
- Posts: 40
- Joined: Sat Jun 09, 2007 3:33 pm
- Current Ride: Yamaha ycs1c and VFR V-teac
- Location: Westhillish
-
Toonser
- Scary biscuits
- Posts: 162
- Joined: Tue Apr 10, 2007 8:08 pm
- Current Ride: YER MA!!
Re: Crankcase m6 bolts/screws
.
Last edited by Toonser on Mon Apr 21, 2008 8:08 pm, edited 1 time in total.
-
garymitch
- Mr Angry
- Posts: 389
- Joined: Mon Jul 30, 2007 12:51 am
- Location: on here
Re: Crankcase m6 bolts/screws
iv got. what length you wanting 
-
Newbus
- Chopper
- Posts: 213
- Joined: Fri Apr 06, 2007 8:02 pm
- Current Ride: Triumph Triple
Re: Crankcase m6 bolts/screws
Grampian fastners in dyce have a good range of stuff
http://www.grampianfasteners.com/Index. ... =1&Level=1
http://www.grampianfasteners.com/Index. ... =1&Level=1