Looking for some help from anyone with a 600K1 or something which has the same type of sidestand.
I'm trying to get mine back on the bike and I have all the bits I need I think but can't seem to get it on.
I'm thinking one of the smaller holes in the middle should have a pin or something like that sticking through it so that 1 end of the spring can hook on to.
If anyone can help that would be great as it's pi$$ing me off Mad
Sidestand
-
Newbus
- Chopper
- Posts: 213
- Joined: Fri Apr 06, 2007 8:02 pm
- Current Ride: Triumph Triple
Re: Sidestand
Dont know if this will help but you may get a manual here
http://manualz.info/index.htm
http://manualz.info/index.htm
-
02iomtt
- Direct Access
- Posts: 41
- Joined: Mon Jan 19, 2009 2:49 am
- Current Ride: GSXR 600 K1
Re: Sidestand
Thanks mate I do actually have a haynes manual.
I posted my problem on another forum and have had people tell me it's hand made, which is understandable as it started it's life as a tt racer. I think I'm going to need to get creative to fix the problem.
I posted my problem on another forum and have had people tell me it's hand made, which is understandable as it started it's life as a tt racer. I think I'm going to need to get creative to fix the problem.
-
Gazza
- I don't believe it!
- Posts: 2475
- Joined: Mon Sep 10, 2001 1:00 am
- Current Ride: KTM 690 Duke
- Location: Sconny Botland
Re: Sidestand
Looks pretty hand made to me. Good luck with the creativity.02iomtt wrote:Thanks mate I do actually have a haynes manual.
I posted my problem on another forum and have had people tell me it's hand made, which is understandable as it started it's life as a tt racer. I think I'm going to need to get creative to fix the problem.
