Bleeding problem
-
- Direct Access
- Posts: 3
- Joined: Wed Oct 28, 2009 10:21 am
- Current Ride: CBR 600F
Bleeding problem
Hi,
I have just put my front calipers back on an old xj600 bike after having sticky pistons. I have replaced all washers and bolts.
Here's the problem - I have filled up the master cylinder with the new fluid but it will not move out when i pull the leaver. I saw a few a bubbles when I first started but then nothing. Hence I cant bleed it from the caliper.
Could it be a faulty master cylinder?
Cheers for any advise
I have just put my front calipers back on an old xj600 bike after having sticky pistons. I have replaced all washers and bolts.
Here's the problem - I have filled up the master cylinder with the new fluid but it will not move out when i pull the leaver. I saw a few a bubbles when I first started but then nothing. Hence I cant bleed it from the caliper.
Could it be a faulty master cylinder?
Cheers for any advise
-
- Baw Bag
- Posts: 96
- Joined: Sun Oct 05, 2008 7:13 pm
- Current Ride: ZXR750L2,CBR600FX
- Location: Aberdeen
Re: Bleeding problem
pm sent 

-
- Direct Access
- Posts: 3
- Joined: Wed Oct 28, 2009 10:21 am
- Current Ride: CBR 600F
Re: Bleeding problem
Update...
The lever seems to have pressure but no output? At most i have seen 15 bubbles in my bleed bottle but no sign of fluid.
Also the leaver does not release pressure when i loosen the bleed nipple.
I can only think that there is some kind of blockage in the master cylinder
The lever seems to have pressure but no output? At most i have seen 15 bubbles in my bleed bottle but no sign of fluid.
Also the leaver does not release pressure when i loosen the bleed nipple.
I can only think that there is some kind of blockage in the master cylinder
- Zax
- Derren Brown
- Posts: 1443
- Joined: Sun Mar 23, 2003 6:48 pm
- Location: Out in the boonies
Re: Bleeding problem
It can just be an airlock in the system.
1 way round that is "reverse bleeding " ie filling the system from the caliper uo to the cylinder. This purges out all the air upwards instead of down and out the caliper.
1 way round that is "reverse bleeding " ie filling the system from the caliper uo to the cylinder. This purges out all the air upwards instead of down and out the caliper.
- CBRXX
- Tank Slapper
- Posts: 698
- Joined: Wed May 04, 2005 11:13 pm
- Current Ride: decisions decisions
- Location: almost there
Re: Bleeding problem
Not sure about the XL but when we put supermoto wheels on my mates XR we also changed the calipers we then had to take the caliper off and hold it so that the bleed nipple was the highest point in the system
- al
- Mass Debater
- Posts: 4768
- Joined: Wed Sep 05, 2001 1:00 am
- Current Ride: Space Hopper
- Location: Uranus
- Contact:
Re: Bleeding problem
He said nipple! 

- BIGSTEVE
- I can't believe it's not crotchbutter
- Posts: 304
- Joined: Thu Jun 26, 2008 4:21 pm
- Current Ride: Rocket 3 Roadster
- Location: Brig o doom
- Contact:
Re: Bleeding problem
Is that not a problem the opposite sex have once a month? 

- Dave
- Enjoys a nice shaft!
- Posts: 2160
- Joined: Fri Dec 12, 2003 8:24 am
- Current Ride: Big sensible pretty bikes with big smooth tyres,
Small bikes with small lumpy tyres and a truck with HUGE lumpy tyres ! - Location: Red Dwarf
- Contact:
Re: Bleeding problem
BIGSTEVE wrote:Is that not a problem the opposite sex have once a month?
no, that is a big problem that the male sex has once a month
- BIGSTEVE
- I can't believe it's not crotchbutter
- Posts: 304
- Joined: Thu Jun 26, 2008 4:21 pm
- Current Ride: Rocket 3 Roadster
- Location: Brig o doom
- Contact:
Re: Bleeding problem
Dave wrote:BIGSTEVE wrote:Is that not a problem the opposite sex have once a month?
no, that is a big problem that the male sex has once a month


- CBRXX
- Tank Slapper
- Posts: 698
- Joined: Wed May 04, 2005 11:13 pm
- Current Ride: decisions decisions
- Location: almost there
Re: Bleeding problem
Well it makes a change from all these flanges I've been looking at all dayBig Kneed Al (master of the emergency stop & "stand up" comedian) wrote:He said nipple!
.
.
.
.
.
.
.
.
.
I'll shut the door on the way out will I

-
- Direct Access
- Posts: 3
- Joined: Wed Oct 28, 2009 10:21 am
- Current Ride: CBR 600F
Re: Bleeding problem
To keep the subject going (sort of)
I got the fluid down to the Nipple by sucking on them both, always a good thing to do
(via a long bit of clear tube)
The handle is still soft but I am getting lots of small bubbles by gently squeezing the handle, hopefully it will build up preasure.
I got the fluid down to the Nipple by sucking on them both, always a good thing to do

The handle is still soft but I am getting lots of small bubbles by gently squeezing the handle, hopefully it will build up preasure.
- BIGSTEVE
- I can't believe it's not crotchbutter
- Posts: 304
- Joined: Thu Jun 26, 2008 4:21 pm
- Current Ride: Rocket 3 Roadster
- Location: Brig o doom
- Contact:
Re: Bleeding problem
pm sent bud 

- metallninja
- Big Nose
- Posts: 564
- Joined: Fri May 26, 2006 3:52 pm
- Current Ride: CB1000R
- Location: Sheepless
Re: Bleeding problem
Was i the only one?kirahan wrote:The handle is still soft but I am getting lots of small bubbles by gently squeezing the handle, hopefully it will get hard
- Ratz
- Anyone for cricket?
- Posts: 382
- Joined: Thu Jul 12, 2007 1:05 pm
- Current Ride: Jedi Speeder Bike
- Location: Where the farce may lead!
Re: Bleeding problem
nopemetallninja wrote:Was i the only one?kirahan wrote:The handle is still soft but I am getting lots of small bubbles by gently squeezing the handle, hopefully it will get hard
