My bike

Yamahahaha · Post by **Yamahahaha** » Mon Mar 01, 2010 7:05 pm

Flamedamper wrote:
Yamahahaha wrote:Pics of the bike finished.

So what do you all think?
Looking really good Barry, Like I said before the red was the right choice, see ya on the egg run if your going.

Defo going to the egg run. Few more things to do, paint protection film to get fitted, thinking about buying some carbon fibre vinyl for the swinging arm? Damper kit should be here tomorrow so I will get that fitted and the clear tank protection pad.

brooner · Post by **brooner** » Tue Mar 02, 2010 9:19 am

Yamahahaha wrote:paint protection film to get fitted

hope it goes on ok to protect the cracking paintjob - very impressive

BIGSTEVE · Post by **BIGSTEVE** » Tue Mar 02, 2010 10:01 am

That is a very tidy bike indeed mate, you must be glad to have it finished

Yamahahaha · Post by **Yamahahaha** » Tue Mar 02, 2010 2:57 pm

Cheers guys, just glad it back before the egg run. I now need to pop down passed Gibbs Tools as I need a 36mm socket so I can fit the damper. Just waiting for the paint protection guy to pop round for a look.

JTC · Post by **JTC** » Tue Mar 02, 2010 3:01 pm

Yamahahaha wrote:Cheers guys, just glad it back before the egg run. I now need to pop down passed Gibbs Tools as I need a 36mm socket so I can fit the damper. Just waiting for the paint protection guy to pop round for a look.

i might have one you can borrow, i'll rake about in the garage tonight if you want

juls · Post by **juls** » Tue Mar 02, 2010 3:17 pm

JTC wrote:
Yamahahaha wrote:Cheers guys, just glad it back before the egg run. I now need to pop down passed Gibbs Tools as I need a 36mm socket so I can fit the damper. Just waiting for the paint protection guy to pop round for a look.
i might have one you can borrow, i'll rake about in the garage tonight if you want

sorry I'm assuming you havent tydied up yet

JTC · Post by **JTC** » Tue Mar 02, 2010 3:48 pm

juls wrote:
JTC wrote:
Yamahahaha wrote:Cheers guys, just glad it back before the egg run. I now need to pop down passed Gibbs Tools as I need a 36mm socket so I can fit the damper. Just waiting for the paint protection guy to pop round for a look.
i might have one you can borrow, i'll rake about in the garage tonight if you want
sorry I'm assuming you havent tydied up yet

nope, it's still a shitehole... i'm assuming you haven't found the spell check button yet either

Ratz · Post by **Ratz** » Tue Mar 02, 2010 3:51 pm

stunning!

red was the way to go nae question!

Yamahahaha · Post by **Yamahahaha** » Tue Mar 02, 2010 6:03 pm

JTC wrote:
Yamahahaha wrote:Cheers guys, just glad it back before the egg run. I now need to pop down passed Gibbs Tools as I need a 36mm socket so I can fit the damper. Just waiting for the paint protection guy to pop round for a look.
i might have one you can borrow, i'll rake about in the garage tonight if you want

Got one from Gibbs Tools, but the clown that had the bike before me changed the yoke nut to a 32mm nut??, so I had to buy a 36mm & 32mm socket. Damper & Tank Pad now fitted.

Yamahahaha · Post by **Yamahahaha** » Tue Mar 02, 2010 6:06 pm

Ratz wrote:stunning!

red was the way to go nae question!

I wanted to be different, so it was red all the way.

Yamahahaha · Post by **Yamahahaha** » Tue Mar 02, 2010 10:26 pm

I am planning on buying another swing arm & fork lowers then powdercoat them black.

juls · Post by **juls** » Tue Mar 02, 2010 11:36 pm

JTC wrote:
nope, it's still a shitehole... i'm assuming you haven't found the spell check button yet either

Meanie... you know fine my fingers are dyslexic... least I know where the caps button is when I need it!!

juls · Post by **juls** » Tue Mar 02, 2010 11:37 pm

Yamahahaha wrote:
Ratz wrote:stunning!

red was the way to go nae question!
I wanted to be different, so it was red all the way.

Really really smart, well done

Yamahahaha · Post by **Yamahahaha** » Tue Mar 02, 2010 11:39 pm

juls wrote:
Yamahahaha wrote:
Ratz wrote:stunning!

red was the way to go nae question!
I wanted to be different, so it was red all the way.
Really really smart, well done

Thanks.

steve · Post by **steve** » Tue Mar 02, 2010 11:52 pm

uve made a good job of your bike dude an im impressed at how quickly you got all the work done

Yamahahaha · Post by **Yamahahaha** » Wed Mar 03, 2010 12:07 am

JT52 wrote:uve made a good job of your bike dude an im impressed at how quickly you got all the work done

When I get going nothing stops me. Swinging arm & fork lowers are letting the bike down, so I will pop over to Breaking Point tomorrow and get a price. If the price is right I will get them over for powdercoating and hopefully have them all fitted before the egg run. Also should add I bought carbon fibre engine covers & chainguard tonight, so they will be getting fitted also. So only thing left is new rearsets and then I will be happy.

Yamahahaha · Post by **Yamahahaha** » Wed Mar 03, 2010 3:18 am

The carbon fibre engine covers don't have any glue/adhesive. Does anyone know the best stuff to use??

Yamahahaha · Post by **Yamahahaha** » Wed Mar 03, 2010 4:51 am

Yamahahaha wrote:The carbon fibre engine covers don't have any glue/adhesive. Does anyone know the best stuff to use??

Found the stuff on eBay - Sikaflex 221. Got a 300ml tube for Â£4.50.

Coddy · Post by **Coddy** » Wed Mar 03, 2010 5:09 am

Aye, looks tidy.
Nae sure about the pink roof tiles on the green house though.

Yamahahaha · Post by **Yamahahaha** » Sun Apr 18, 2010 11:23 pm

http://s678.photobucket.com/home/Coulli ... =slideshow

Just new rearsets wanted and its should be complete.

AberdeenBikers

My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike

Re: My bike