Freeing up tightspots in chain
- Coully
- Knee Flapper
- Posts: 289
- Joined: Thu Apr 14, 2005 10:12 pm
- Current Ride: 1988 CBR 600FL jellymould Gone
1990 VFR 750FL - Gone
1999 VFR 800Fix -Gone
2006 K1200s - Location: Westhill
- Contact:
Freeing up tightspots in chain
Hi folks , just wanted to canvas for methods on freeing up said tightspots in chain. just got bike back from service and MOT (had put in new sprockets (shop would supply chain) to be fitted if required as had to get new rear shock and figured 2 birds 1 stone and all that), on receipt of bike mechanic said he hadn't fitted new sprockets and chain as they looked relatively new (very little use of bike in last year and a half) and just give it a good oil and work out the tightspots, which leads me to my query- how do I
- RK6
- Would you like a mushroom?
- Posts: 1508
- Joined: Thu Feb 01, 2007 2:30 pm
- Current Ride: Hypermotard SP
- Location: Aberdeen
Re: Freeing up tightspots in chain
There may be a better way out there but I'd just soak it in a basin of oil for a couple days taking it out every now & again to gradually work out the tight spots.
Simples.
Simples.

- Coully
- Knee Flapper
- Posts: 289
- Joined: Thu Apr 14, 2005 10:12 pm
- Current Ride: 1988 CBR 600FL jellymould Gone
1990 VFR 750FL - Gone
1999 VFR 800Fix -Gone
2006 K1200s - Location: Westhill
- Contact:
- kennybhoy
- Baw Bag
- Posts: 105
- Joined: Fri May 16, 2008 1:04 pm
- Current Ride: Kawasaki Zephyr 1100 A2 & XT660X
- Location: Bonnie Scotland
Re: Freeing up tightspots in chain
further...I have been known to put the chain in an old pot with old oil and put it on an outdoor gas burner...not too hot though
beware, it stinks!!

beware, it stinks!!
- Coully
- Knee Flapper
- Posts: 289
- Joined: Thu Apr 14, 2005 10:12 pm
- Current Ride: 1988 CBR 600FL jellymould Gone
1990 VFR 750FL - Gone
1999 VFR 800Fix -Gone
2006 K1200s - Location: Westhill
- Contact:
Re: Freeing up tightspots in chain
i was looking to avoid the hassle of chain removal.
- Newbus
- Chopper
- Posts: 213
- Joined: Fri Apr 06, 2007 8:02 pm
- Current Ride: Triumph Triple
Re: Freeing up tightspots in chain
Being honest i would change the chain if it has tight spots at all. I have seen the mess that can be made with a chain snapping. Not least if it snaps when driving can lock up wheel and cause accident. For the cost of a new chain compared to anything else .
Thinks of why the chain has tight spots . Rust on pins and bearings. Will that go away if oiled no it will just cover up the damage already done to the chain.
Thinks of why the chain has tight spots . Rust on pins and bearings. Will that go away if oiled no it will just cover up the damage already done to the chain.
- g.cowen
- Scary biscuits
- Posts: 163
- Joined: Sun Aug 08, 2004 11:29 am
- Current Ride: 2012 KTM 990 SMT
VW Amarok
'91 750 Guzzi project... - Location: bieldside
Re: Freeing up tightspots in chain
Aye, its knackered - buy a new one, it will never be any good - maybe need sprockets aswell ? 

- Coully
- Knee Flapper
- Posts: 289
- Joined: Thu Apr 14, 2005 10:12 pm
- Current Ride: 1988 CBR 600FL jellymould Gone
1990 VFR 750FL - Gone
1999 VFR 800Fix -Gone
2006 K1200s - Location: Westhill
- Contact:
Re: Freeing up tightspots in chain
Fair do's lads, cheers.
- Dave
- Enjoys a nice shaft!
- Posts: 2160
- Joined: Fri Dec 12, 2003 8:24 am
- Current Ride: Big sensible pretty bikes with big smooth tyres,
Small bikes with small lumpy tyres and a truck with HUGE lumpy tyres ! - Location: Red Dwarf
- Contact:
Re: Freeing up tightspots in chain
I would change the chain
Last year I had a sticky link on the chain, ordered new chain and cogs but before they arrived the chain broke while I was riding.
Luckily I was almost home and was doing a low speed manoeuvre and the chain just slipped away from the bike.
This year I had another chain failure.
The chain had high miles but it did not have any sticky links and did not feel too worn, I know because the weekend before the break I gave it a good look at and lube (I can't believe it's not butter!), with running the chain thru my fingers.
Now I will change any of my chains that have any sticky links or has done more than 10k miles
Last year I had a sticky link on the chain, ordered new chain and cogs but before they arrived the chain broke while I was riding.
Luckily I was almost home and was doing a low speed manoeuvre and the chain just slipped away from the bike.
This year I had another chain failure.
The chain had high miles but it did not have any sticky links and did not feel too worn, I know because the weekend before the break I gave it a good look at and lube (I can't believe it's not butter!), with running the chain thru my fingers.
Now I will change any of my chains that have any sticky links or has done more than 10k miles
- Coully
- Knee Flapper
- Posts: 289
- Joined: Thu Apr 14, 2005 10:12 pm
- Current Ride: 1988 CBR 600FL jellymould Gone
1990 VFR 750FL - Gone
1999 VFR 800Fix -Gone
2006 K1200s - Location: Westhill
- Contact:
Re: Freeing up tightspots in chain
chain hasn't done many miles, be lucky if its done 5k, new sprockets fitted at same time, so should prob do sprockets as well eh! have sprockets ready to fit, just require chain. time to go shopping, ha ha
- Ratz
- Anyone for cricket?
- Posts: 382
- Joined: Thu Jul 12, 2007 1:05 pm
- Current Ride: Jedi Speeder Bike
- Location: Where the farce may lead!
Re: Freeing up tightspots in chain
tight spots usually equals corrosion and lack of lube (I can't believe it's not butter!)
new chain as has been said above is the way to go
new chain as has been said above is the way to go
- Crashgoggz
- Direct Access
- Posts: 35
- Joined: Sun Aug 17, 2008 10:51 pm
- Current Ride: '99 Honda Hornet 600.
Re: Freeing up tightspots in chain
I had steely @ craigston tyres do my chain and sprockets a couple of weeks ago, £130 fitted on the SV. Give him a call 07758779989.
- kennybhoy
- Baw Bag
- Posts: 105
- Joined: Fri May 16, 2008 1:04 pm
- Current Ride: Kawasaki Zephyr 1100 A2 & XT660X
- Location: Bonnie Scotland
Re: Freeing up tightspots in chain
I agree with the other guys. In my younger days when trying out different ways to save money I used to go to the hassle of trying to work the links loose. My maintenance ensures I don't get them anymore but if I did a replacement chain would be the way to go for me 

- Coully
- Knee Flapper
- Posts: 289
- Joined: Thu Apr 14, 2005 10:12 pm
- Current Ride: 1988 CBR 600FL jellymould Gone
1990 VFR 750FL - Gone
1999 VFR 800Fix -Gone
2006 K1200s - Location: Westhill
- Contact:
Re: Freeing up tightspots in chain
no worries lads, i did ask if the sprockets i provided during service could be fitted and that a chain could be provided, got bike back and mechanic saying that oiling chain etc should loosen it up, and that the sprockets looked quite new so no real need to change them. needless to say new chain is in post and hopefully will get everything done this weekend
- missile
- Candle in the wind.
- Posts: 661
- Joined: Thu Sep 06, 2001 1:00 am
- Current Ride: Virtual rider
- Location: Ride hard or stay home
- Contact:
Re: Freeing up tightspots in chain
I would take it somewhere else next time.Coully wrote:no worries lads, i did ask if the sprockets i provided during service could be fitted and that a chain could be provided, got bike back and mechanic saying that oiling chain etc should loosen it up, and that the sprockets looked quite new so no real need to change them. needless to say new chain is in post and hopefully will get everything done this weekend
- Gazza
- I don't believe it!
- Posts: 2475
- Joined: Mon Sep 10, 2001 1:00 am
- Current Ride: KTM 690 Duke
- Location: Sconny Botland
Re: Freeing up tightspots in chain
Especially if it's an o-ring type!kennybhoy wrote:further...I have been known to put the chain in an old pot with old oil and put it on an outdoor gas burner...not too hot though![]()
- Coully
- Knee Flapper
- Posts: 289
- Joined: Thu Apr 14, 2005 10:12 pm
- Current Ride: 1988 CBR 600FL jellymould Gone
1990 VFR 750FL - Gone
1999 VFR 800Fix -Gone
2006 K1200s - Location: Westhill
- Contact:
Re: Freeing up tightspots in chain
didn't want to name names, new chain fitted on sunday morning, and all is well with the world, now all we need is for the weather to sort itself oot! Quite glad i wear textile gear given the general unpredictability of the seasons