Maintenance tip of the day... Checking fuses
- Dave
- Enjoys a nice shaft!
- Posts: 2160
- Joined: Fri Dec 12, 2003 8:24 am
- Current Ride: Big sensible pretty bikes with big smooth tyres,
Small bikes with small lumpy tyres and a truck with HUGE lumpy tyres ! - Location: Red Dwarf
- Contact:
Maintenance tip of the day... Checking fuses
When removing fuses from the fuse box, remember to keep a good hold of the fuse and not drop it into the mass of fairings/wires/hoses, never to be found again...
- Akrapovic
- ZZR1400.....Just like a Golf
- Posts: 1971
- Joined: Thu Mar 02, 2006 10:37 am
- Current Ride: ZX10R and MT-10.
- Location: Either grafting, down the pub, being a hermit or at a track-day.
- Contact:
Re: Maintenance tip of the day... Checking fuses
This sounds like a bit of a dig at Mr Noden. 

- Zathos
- Mr Magpie
- Posts: 3161
- Joined: Sun Apr 27, 2003 10:46 pm
- Current Ride: Aprilia Tuono Factory R
- Location: Everywhere & Nowhere
Re: Maintenance tip of the day... Checking fuses
Triumph provide a nice handy fuse pulling tool inside the fusebox lid. When used correctly this helps to prevent accidental fuse droppage.
- Dave
- Enjoys a nice shaft!
- Posts: 2160
- Joined: Fri Dec 12, 2003 8:24 am
- Current Ride: Big sensible pretty bikes with big smooth tyres,
Small bikes with small lumpy tyres and a truck with HUGE lumpy tyres ! - Location: Red Dwarf
- Contact:
Re: Maintenance tip of the day... Checking fuses
Akrapovic wrote:This sounds like a bit of a dig at Mr Noden.
Not at all, just some friendly advice...but a certain act last night did remind me of this tip


How may of you have dropped fuses when taking them out of the box

I have, many a time, and I am very sure I will do it again closely followed by the thought

- Gazza
- I don't believe it!
- Posts: 2475
- Joined: Mon Sep 10, 2001 1:00 am
- Current Ride: KTM 690 Duke
- Location: Sconny Botland
Re: Maintenance tip of the day... Checking fuses
Dropping ones key can be just as embarrassing..... 

You do not have the required permissions to view the files attached to this post.
-
- I am spethial and I've got nae friends
- Posts: 46
- Joined: Sat Sep 14, 2002 11:31 am
- Current Ride: A mental ninja.
- Location: Doon the coast a bit.
Re: Maintenance tip of the day... Checking fuses
So do Volkswagen. And Ford. And Big Mans Wanger. So not just Triumph then?Zathos wrote:Triumph provide a nice handy fuse pulling tool inside the fusebox lid. When used correctly this helps to prevent accidental fuse droppage.
- Zathos
- Mr Magpie
- Posts: 3161
- Joined: Sun Apr 27, 2003 10:46 pm
- Current Ride: Aprilia Tuono Factory R
- Location: Everywhere & Nowhere
Re: Maintenance tip of the day... Checking fuses
evomannie wrote:So do Volkswagen. And Ford. And Big Mans Wanger. So not just Triumph then?Zathos wrote:Triumph provide a nice handy fuse pulling tool inside the fusebox lid. When used correctly this helps to prevent accidental fuse droppage.
Gosh, so I'm guessing that most vehicle fuse boxes would have this useful device located inside. Best make sure everyone knows about this to save possible embarasment and serious p*ss taking

- brooner
- Mr Lobsterfish
- Posts: 157
- Joined: Wed Jul 18, 2007 6:32 pm
- Current Ride: StigBike
- Location: Across the road from Dickie
Re: Maintenance tip of the day... Checking fuses
There are no fuses on the current range of Panzer bikes - CAN-bus electrics, voltage sensing and auto-reset MCB's (there are one or two exceptions to this, depending on specific options)evomannie wrote:So do Volkswagen. And Ford. And Big Mans Wanger. So not just Triumph then?Zathos wrote:Triumph provide a nice handy fuse pulling tool inside the fusebox lid. When used correctly this helps to prevent accidental fuse droppage.
- Dave
- Enjoys a nice shaft!
- Posts: 2160
- Joined: Fri Dec 12, 2003 8:24 am
- Current Ride: Big sensible pretty bikes with big smooth tyres,
Small bikes with small lumpy tyres and a truck with HUGE lumpy tyres ! - Location: Red Dwarf
- Contact:
Re: Maintenance tip of the day... Checking fuses
brooner wrote:There are no fuses on the current range of Panzer bikes - CAN-bus electrics, voltage sensing and auto-reset MCB's (there are one or two exceptions to this, depending on specific options)evomannie wrote:So do Volkswagen. And Ford. And Big Mans Wanger. So not just Triumph then?Zathos wrote:Triumph provide a nice handy fuse pulling tool inside the fusebox lid. When used correctly this helps to prevent accidental fuse droppage.
Is this the same latest and greatest in electrical technology...so easy to toast at the nearest touch of a welding rod anywhere near the bike

- Dickie
- Tank Slapper
- Posts: 679
- Joined: Fri Dec 13, 2002 9:22 pm
- Current Ride: SV650, ER6 and a pikey van
- Location: Aberdeen
Re: Maintenance tip of the day... Checking fuses
If you're too thick to isolate the electrics before welding your bike (a la Long Way Round) then some people would say you deserve what you get.
-
- I am spethial and I've got nae friends
- Posts: 46
- Joined: Sat Sep 14, 2002 11:31 am
- Current Ride: A mental ninja.
- Location: Doon the coast a bit.
Re: Maintenance tip of the day... Checking fuses
Zathos wrote:evomannie wrote:So do Volkswagen. And Ford. And Big Mans Wanger. So not just Triumph then?Zathos wrote:Triumph provide a nice handy fuse pulling tool inside the fusebox lid. When used correctly this helps to prevent accidental fuse droppage.
Gosh, so I'm guessing that most vehicle fuse boxes would have this useful device located inside. Best make sure everyone knows about this to save possible embarasment and serious p*ss taking
ah, the irony was lost on you then
