
Driveways
Moderators: al, Administrator
-
- Scary biscuits
- Posts: 178
- Joined: Sat Jul 12, 2008 3:42 pm
Driveways
Anyone know of a decent company/guy who can do a driveway, approx 80m2, looking for either tar or imprinted concrete, any recommendations? Or anyone to avoid too? 

- missile
- Candle in the wind.
- Posts: 661
- Joined: Thu Sep 06, 2001 1:00 am
- Current Ride: Virtual rider
- Location: Ride hard or stay home
- Contact:
Re: Driveways
Avoid using pikeys 

- Coddy
- Chavtastic!
- Posts: 920
- Joined: Sat May 21, 2005 2:54 am
- Current Ride: 2011 Ecosse Arr Waan SP Special.
- Location: I did see the speed limit officer, i just didn't see you....
Re: Driveways
This is who do the majority of driveways for houses like new builds or upgrades?
http://seivwrightbros.com
http://seivwrightbros.com
- Gazza
- I don't believe it!
- Posts: 2475
- Joined: Mon Sep 10, 2001 1:00 am
- Current Ride: KTM 690 Duke
- Location: Sconny Botland
Re: Driveways
Friend of mine thought he had a great deal from some pikeys. Lasted about 6 months before the weeds came through and had to be dug up and redone.missile wrote:Avoid using pikeys
- Tyke
- Scary biscuits
- Posts: 130
- Joined: Mon Aug 22, 2005 10:10 pm
- Current Ride: Triumph Tiger 800 XC
- Location: Mingin Fingan
Re: Driveways
JR Donald & Son, Inverurie
They're not the cheapest, but they really are good - turn up on time and are very tidy and professional. I'd use them again anytime.
They're not the cheapest, but they really are good - turn up on time and are very tidy and professional. I'd use them again anytime.
-
- Direct Access
- Posts: 24
- Joined: Sat Jan 09, 2010 11:27 am
- Current Ride: Triumph Tiger 1050 Sport... Triumph Street Triple R
Re: Driveways
I can highly recommend this lot http://www.harestone-driveways.com
- Viffer
- Direct Access
- Posts: 16
- Joined: Thu Dec 20, 2007 8:20 pm
- Location: Blackburn
Re: Driveways
Send me a pm, I'll give you a number of a dude that will dee a good job. I had my driveway and patio at the back redone. 

-
- Scary biscuits
- Posts: 178
- Joined: Sat Jul 12, 2008 3:42 pm
Re: Driveways
Pm sent mateViffer wrote:Send me a pm, I'll give you a number of a dude that will dee a good job. I had my driveway and patio at the back redone.

-
- Scary biscuits
- Posts: 178
- Joined: Sat Jul 12, 2008 3:42 pm
Re: Driveways
Will give them all a call, had D&E Mackay round to measure up, they seem pretty clued up too, the VAT's a killer though, ideally a company which don't charge VAT 

-
- Direct Access
- Posts: 16
- Joined: Wed Mar 25, 2009 7:28 pm
- Current Ride: cbr1000rr
Re: Driveways
I've just been getting quotes to had 3 so far agc in Alford, deeside road construction and asw from fintry!
-
- Scary biscuits
- Posts: 178
- Joined: Sat Jul 12, 2008 3:42 pm
Re: Driveways
What you planning? They give you price per m2?bob YZFR6 wrote:I've just been getting quotes to had 3 so far agc in Alford, deeside road construction and asw from fintry!
- Zathos
- Mr Magpie
- Posts: 3161
- Joined: Sun Apr 27, 2003 10:46 pm
- Current Ride: Aprilia Tuono Factory R
- Location: Everywhere & Nowhere
Re: Driveways
huffanpuff wrote:Will give them all a call, had D&E Mackay round to measure up, they seem pretty clued up too, the VAT's a killer though, ideally a company which don't charge VAT
Unless they are pikey scum they will all charge vat, cos that's the law

If u find someone who will do you a deal on vat, they will rip you off on the job as well.
I'm getting work done by agc and they are a good bunch.
-
- Scary biscuits
- Posts: 160
- Joined: Sun Feb 28, 2010 3:29 pm
- Current Ride: Tuono V4R
- Location: Aberdeenish
Re: Driveways
I could point you towards a mate of mine who may accept flexible payment options, he does a good job but he's not the most reliable at turning up when he says he will.
-
- Direct Access
- Posts: 16
- Joined: Wed Mar 25, 2009 7:28 pm
- Current Ride: cbr1000rr
Re: Driveways
i have a single drive just now which will be getting replaced with a double drive and new drain gutters at the botom of the drive! I think its about 44m2 roughly? 3 quotes have ranged from £3200 to £5500 inc vat!huffanpuff wrote:What you planning? They give you price per m2?bob YZFR6 wrote:I've just been getting quotes to had 3 so far agc in Alford, deeside road construction and asw from fintry!
- Dave
- Enjoys a nice shaft!
- Posts: 2160
- Joined: Fri Dec 12, 2003 8:24 am
- Current Ride: Big sensible pretty bikes with big smooth tyres,
Small bikes with small lumpy tyres and a truck with HUGE lumpy tyres ! - Location: Red Dwarf
- Contact:
Re: Driveways
£100 a square metre...you can get some decent tiling for that 

-
- Scary biscuits
- Posts: 178
- Joined: Sat Jul 12, 2008 3:42 pm
Re: Driveways
it's the law if VAT registered.. not all Co's are VAT registered... that was my point...they pikeys won't be getting anywhere near it..Zathos wrote:huffanpuff wrote:Will give them all a call, had D&E Mackay round to measure up, they seem pretty clued up too, the VAT's a killer though, ideally a company which don't charge VAT
Unless they are pikey scum they will all charge vat, cos that's the law![]()
If u find someone who will do you a deal on vat, they will rip you off on the job as well.
I'm getting work done by agc and they are a good bunch.
- Dickie
- Tank Slapper
- Posts: 679
- Joined: Fri Dec 13, 2002 9:22 pm
- Current Ride: SV650, ER6 and a pikey van
- Location: Aberdeen
Re: Driveways
If you're doing building work, laying driveways or whatever, your turnover's going to be too high to stay below the VAT threshold.
- al
- Mass Debater
- Posts: 4768
- Joined: Wed Sep 05, 2001 1:00 am
- Current Ride: Space Hopper
- Location: Uranus
- Contact:
Re: Driveways
If you are buying in a lot of materials then it makes no sense not to be VAT registered even if you are under the flat rate VAT Scheme.huffanpuff wrote:it's the law if VAT registered.. not all Co's are VAT registered... that was my point...they pikeys won't be getting anywhere near it..Zathos wrote:huffanpuff wrote:Will give them all a call, had D&E Mackay round to measure up, they seem pretty clued up too, the VAT's a killer though, ideally a company which don't charge VAT
Unless they are pikey scum they will all charge vat, cos that's the law![]()
If u find someone who will do you a deal on vat, they will rip you off on the job as well.
I'm getting work done by agc and they are a good bunch.
- missile
- Candle in the wind.
- Posts: 661
- Joined: Thu Sep 06, 2001 1:00 am
- Current Ride: Virtual rider
- Location: Ride hard or stay home
- Contact:
Re: Driveways
Even if you buy very little materials, it can be beneficial to register for the flat rate VAT scheme.Big Kneed Al (master of the emergency stop & "stand up" comedian) wrote:huffanpuff wrote: If you are buying in a lot of materials then it makes no sense not to be VAT registered even if you are under the flat rate VAT Scheme.